Prior to powering on your machine you will remove all shipping protection pieces. 

1. When looking to the back of the machine you will notice a screw holding the blade positioning mechanism in place. Please unscrew and remove that screw. 
2. You will see a lever on the back left of the machine. Please pull that lever to lift the arms and remove the small black plastic safety holds. 
3. Unbox your power cable from the small white box in your shipment and plug it into the right side of the machine. Your machine is now ready to be powered on.
4. Press the silver button on the right of your machine to power it up and wait for the short power on phase to complete.

Now that our machine is powered on, follow the next steps to fully update your machine! 

1. Press the large gear icon to navigate to settings. From here you will go to Wi-Fi and enter your internet connection. 
2. Once connected, return home by pressing the large house icon.
3. Press the large refresh logo at the top of the home screen and your machine will begin to update. Once this sequence has completed your device is ready for use! 

Note: Updates will need to be completed periodically to help ensure all new devices are properly uploaded and stored onto your machine!